Sibilia

Showing all 73 results

Single piece vacuum with side channel pump fitted directly on the drive shaft. Fairing in carbon steel, silencer for output air, safety relief valve, spare cartridge, control panel with possibility of remote control from suction nozzles.

Extremely efficient despite its small size, the S1000C is equipped with a high performance turbine suction pump which allows for the collection of dusts and solid materials. Ideal for liquid collection

Equipped with a triple-stage turbine and a single phase motor with condensers. Ideal for liquid suction.

Extremely efficient despite its small size, the S1000 is equipped with a high performance turbine suction pump which allows for the collection of dusts and solid materials. Can be connected to pre-separators to increase their collection capacity.

Ideal for the suction of dust and solid materials. Composed of a suction unit with a high performance turbine. Single phase motor with condensers.

Practical and efficient containers in various shapes and dimensions, equipped with very high performance cyclones and material outlet with manual, automatic and continuous solutions. Coupled with our suction units, these give life to "to measure" customer solutions.

Composed of a suction unit with a side channel pump. Suctioned waste is collected in the hopper shaft and later discharged manually or automatically depending on the valve used. Ideal for connecting to centralised installations and/or for the bagging of suctioned material into Big Bags. Ideal for cereal, carbon, plastic, granules.

Composed of a suction unit with a side channel pump. Suctioned waste is collected in the hopper shaft and later discharged manually or automatically depending on the valve used. Ideal for connecting to centralised installations and/or for the bagging of suctioned material into Big Bags. Ideal for cereal, carbon, plastic, granules.

Ideal for the suction of fine dust in difficult and continuous working conditions. Composed of a suction unit with a high power suction side channel pump. Equipped with an aerodynamic cyclone, a large sized main pocket filter and spare cartridge with an automatic filter cleaning system.

Ideal for the suction of fine dust in difficult and continuous working conditions. Composed of a suction unit with a high power suction side channel pump. Equipped with an aerodynamic cyclone, a large sized main pocket filter and spare cartridge with an automatic filter cleaning system.

Ideal for the suction of fine dust in difficult and continuous working conditions. Composed of a suction unit with a high power suction side channel pump. Equipped with an aerodynamic cyclone, a large sized main pocket filter and spare cartridge with an automatic filter cleaning system.

Low power suction unit for fixed applications on public works vehicles, in production processes such as die presses and in the suction of trimmings , finishing powders and small bits. Unit ideal for continuous use.

Low power suction unit for fixed applications on public works vehicles, in production processes such as die presses and in the suction of trimmings , finishing powders and small bits. Unit ideal for continuous use.

Allows for the collection of solid materials and liquids in fixed workstations. Outlet can be set in ducts, conveyor belts, feed screws, big bags. Available in volumes from 90 up to 160 litres.

Allows for an increase in vacuum collection volume by intercepting suctioned products. Available in a solids or liquids version with 90 or 160 litre volumes.

This version with quick connection sleeves allows for a notable reduction in assembly time as no welding is required. Guarantees high performance vacuum and pressure sealing

Allows for the collection of solid materials and in fixed workstations with complete separation of products from the air. Outlet can be set in bins, ducts, conveyor belts, feed screws, big bags. Available with 500 and 1000 litre dust container.

AL202 pneumatic power version. Maintains the same quality as the electric version but offers the possibility of use where electricity is absent or forbidden (ATEX zones, etc.).

Single piece vacuum with side channel pump fitted directly on the drive shaft. Fairing in carbon steel, silencer for output air, safety relief valve, spare cartridge, control panel with possibility of remote control from suction nozzles.

The historic Sibilia vacuum which revolutionised the textile industry: B2A can suction all types of light materials, pieces and scraps.

DSB2A is a high vacuum model in the DS range, designed to suction in even the most difficult working conditions. Like all DS series units, it is accompanied by a separator cyclone, a collection drum and a double filter unit. DSB2A is just as good a unit as other large-sized and higher power models.

F1 is a dust collector designed for the targeted use of dust filtration.

Stationary silo with gravitational discharge through the exhaust valve installed at the bottom, is suitable for the collection of solid type bulk material, granular, or dusty. The separation air / product takes place thanks to the presence of a dynamic cyclone inlet and place on the sky of the pre-separator.

S5 Short is the compact version of the S5/20, while maintaining the same features and performance. Thanks to its small size, it is the perfect solution for stationary installations together with a movable or fixed pre-separator.

SCH. 2064 outfitting involves a collection container with capacity from 3.5 to 7 m³. Installed on the platform, it is offered with a two-arm overturning system and hydraulic bottom opening controlled via push-button panel. Outfitting can be fully customised and coupled with the most suitable Sibilia vacuum units for customer needs. There are numerous options for outfitting the SCH. 2064 unit in order to obtain ATEX certification.

Allows for the collection of solid materials and in fixed workstations with complete separation of products from the air. Outlet can be set in bins, ducts, conveyor belts, feed screws, big bags. Available with 1000 litre dust container.

AL202 is a versatile liquid vacuum equipped with a side channel pump turbine

Single piece vacuum with side channel pump fitted directly on the drive shaft. Fairing in carbon steel, silencer for output air, safety relief valve, spare cartridge, control panel with possibility of remote control from suction nozzles.

The latest addition to the Sibilia textile sector: a pre-separator equipped with a 7.5 kW side channel pump and a Big Bag container with capacity equal to 1 m³

DS8 is a universal vacuum in two versions: DS8-B3 with a high vacuum value and DS8-15 with increased air flow. These units can vacuum with high efficiency thanks to their separator cyclone, collection drum and double filter unit. Two filter versions (sleeve or pocket) are available to adapt to user needs.

F100 is a high performance stationary unit designed to vacuum all types of powdery material.

Compact, large filter surface dust collectors with an automatic cleaning system and a collection container. These can also operate inside closed indoor environments thanks to emission levels which are lower than 5mg/Nmc. Easily installed and ready-to-use by connecting the suction points to the dust collector inlet by means of rigid or flexible tubes. Available in models from 1,000 to 14,000 mc/h.

S5/20 is the entry-level model of the High Vacuum S series.

Vacuum cleaners ideal for use in difficult conditions, equipped with a cooling lobe pump which allows for a substantial vacuum level. This system is a complete, independent suction unit for material collection. The filter unit is composed of a main filter made of fabric which is electro-mechanically shaken and pocket shaped to reach a suitable surface. The safety filter is a class M air filter cartridge. Robust steel frame construction with soundproofing. Inspection doors: side door for pump/motor, upper door to control the safety filter and take out the main filter, side door to check the main filter. Upper hooks for transport with crane and wings for transport with fork lift. Spherical male inlet DN 80 or 100 mm. 500 litres collection hopper: can be easily transported with a fork lift truck. With discharge door at the bottom activated with a lever system. Equipped with high efficiency cyclone and level sensor. The top can be lifted with a manual hydraulic pump.

Fully autonomous suction unit complete with platform to be positioned on trucks with container hooking system (transport containers). Available in various powers with electric or Diesel motors. Conical container for discharging suctioned products directly into big bags.

Allows for an increase in vacuum collection volume by intercepting suctioned products. Available in a solids or liquids version with 400 or 600 litre volumes. Equipped with wheels and can be transported via forklift. Emptying is carried out via container overturning.

Allows for the collection of solid materials and in fixed workstations with complete separation of products from the air. Outlet can be set in bins, ducts, conveyor belts, feed screws, big bags. Available with 160 litre dust container.

Special AL602 and AL1002 model outfittings. In addition to the standard equipment, the two units are equipped with an on-board

Single piece vacuum with side channel pump fitted directly on the drive shaft. Fairing in carbon steel, silencer for output air, safety relief valve, spare cartridge, control panel with possibility of remote control from suction nozzles.

Vacuum unit with water cooled Diesel motor and roots blower pump to help achieve a high vacuum value. The container is equipped with a cyclone, automatic filter cleaning system, and an efficient hydraulic positioning system and quick discharge into Big Bags by means of butterfly valve. Installation on trolleys ensures flexibility of use and easy handling.

The DS1505 version powered by compressed air is equipped with a Venturi suction pump, offering the possibility of use where electricity is absent or forbidden (ATEX zones, etc.).

This is a movable version of the F100 unit.

Extremely small vacuum unit which that be configured in two outfittings: with an electric motor or a Diesel motor.

Vacuum cleaners ideal for use in difficult conditions, equipped with a cooling lobe pump which allows for a substantial vacuum level. This system is a suction unit to be combined with a pre-separator for material collection. The filter unit is composed of a main filter made of fabric which is electro-mechanically shaken and pocket shaped to reach a suitable surface. The safety filter is a class M air filter cartridge. Robust steel frame construction with soundproofing. Inspection doors: side door for pump/motor, upper door to control the safety filter and take out the main filter, side door to check the main filter. Upper hooks for transport with crane and wings for transport with fork lift. Spherical male inlet DN 80 or 100 mm. 500 litres collection hopper: can be easily transported with a fork lift truck. With discharge door at the bottom activated with a lever system. Equipped with high efficiency cyclone and level sensor. The top can be lifted with a manual hydraulic pump.

Mobile pre-separator with front gravitational discharge and with internal inclined ramp.

Allows for the collection of solid materials and in fixed workstations with complete separation of products from the air. Outlet can be set in bins, ducts, conveyor belts, feed screws, big bags. Available with 1000 litre dust container.

The most powerful Sibilia liquid vacuum. Its roots blower pump can suction even the oiliest liquid material, offering the possibility of pumping liquid back

Suction unit equipped with a cooling lobe pump. Allows for substantial vacuum level thanks to which heavy materials can be transported, including from points located deeper with respect to the collection container.

Compact, versatile vacuum equipped with a suction apparatus with a side channel pump turbine installed directly on the machine head. Allows for collection of solid and powder materials.

F100 is a high performance stationary unit designed to vacuum all types of powdery material.

Mobile preseparator equipped with bottom discharge, suitable for the collection of solid, granular or dusty material. The cyclone situated on the top makes the material fall into container. The discharge door closes automatically when the preseparator is placed on the ground. Level sensor available upon request.

Version with built-in collection container: this feature makes the S8 Top independent during the vacuum and material

Fully autonomous suction unit complete with platform to be positioned on trucks with container hooking system (transport containers). Available in various powers with electric or Diesel motors. Conical container for discharging suctioned products directly into big bags.

Allows for the collection of solid materials and in fixed workstations with complete separation of products from the air. Outlet can be set in bins, ducts, conveyor belts, feed screws, big bags. Available with 1000 litre dust container.

Single piece vacuum with side channel pump fitted directly on the drive shaft. Fairing in carbon steel, silencer for output air, safety relief valve, spare cartridge, control panel with possibility of remote control from suction nozzles.

The DS3000 version powered by compressed air is equipped with a Venturi suction pump, offering the possibility of use where electricity is absent or forbidden (ATEX zones, etc.).

S10 ensures perfect balance between air flow and vacuum, offering either configuration with two electric motors or one Diesel

Suction unit equipped with a cooling lobe pump. Allows for substantial vacuum level thanks to which heavy materials can be transported, including from points located deeper with respect to the collection container.

Medium power vacuum equipped with a side channel pump turbine installed on the base of the machine and protected by a steel frame. The DS3000N (5,5 KW) allows for the collection of different, solid and powder materials and is ideal for continuous work thanks to the use of a pocket or bag filter equipped with a large filter surface. The spare cartridge, which is always present, allows for the user to have a class M machine as a base model. With the addition of a float switch in the container, the vacuum is ideal for collecting liquids.

Available with either electric or Diesel motors, this is a high power unit which ensures targeted performance and higher quantity

High performance vacuum unit suitable for the collection and the transport of big quantities of product. Equipped with rotary blower pump (lobes) with cooling channel and silencer. Independent support frame for pump and engine. Belt drive with adjustable belt tightener. Electric panel board with star/delta device, IP55 electric protection, main switch, control pushbutton low voltage (24 V.AC). Max level alarm, hour counter, vacuum-meter. Presetting for remote control in fixed installations, plug for external level detector device (located in the pre-separator). Electric equipment with double insulation and fire proof. Robust steel frame construction with soundproofing. Inspection doors: large side doors for pump/motor compartment, upper door for maintenance of the main filter, side door to check the main filter, side door to check the safety filter, door of the dust chamber. Upper hooks for transport with cranes and wings for transport with fork lift. Spherical male inlet DN 100 or 120 mm.

Suction unit equipped with a cooling lobe pump. Allows for substantial vacuum level thanks to which heavy materials can be transported, including from points located deeper with respect to the collection container.

DS3000 unit high vacuum performance version. Power and filtering devices remain unchanged.

S22 is a lightweight versatile model, available in two versions: Standard and Top.

Suction unit equipped with a cooling lobe pump. Allows for substantial vacuum level thanks to which heavy materials can be transported, including from points located deeper with respect to the collection container.

DS5000 is equipped with a side channel pump turbine protected by a solid steel frame. Available with different filtering solutions (sleeve, pocket or cartridge). With the addition of a float switch in the container, the vacuum is ideal for collecting liquids.

S30 is a high performance vacuum designed for the recovery and transport of large quantities of product.

High performance vacuum unit suitable for the collection and the transport of big quantities of product. Equipped with rotary blower pump (lobes) with cooling channel and silencer. Independent support frame for pump and engine. Belt drive with adjustable belt tightener. Electric panel board with star/delta device, IP55 electric protection, main switch, control pushbutton low voltage (24 V.AC). Max level alarm, hour counter, vacuum-meter. Presetting for remote control in fixed installations, plug for external level detector device (located in the pre-separator). Electric equipment with double insulation and fire proof. Cartridge safety filter surface = 190.000 cm2, class M (upon request DOP cartridge filter, efficiency 99,995%, 0,3 micron, class H13 with certificate). Robust steel frame construction with soundproofing. Inspection doors: large side doors for pump/motor compartment, upper door for maintenance of the main filter, side door to check the main filter, side door to check the safety filter, door of the dust chamber. Upper hooks for transport with cranes and wings for transport with fork lift. Spherical male inlet DN 120 or 150 mm. To be used with suitable preseperators.

Suction unit equipped with a cooling lobe pump. Allows for substantial vacuum level thanks to which heavy materials can be transported, including from points located deeper with respect to the collection container.

DS5000 unit high vacuum performance version. Power and filtering devices remain unchanged.

The best in the field of industrial vacuums. S40 is a unit that operates in extreme situations thanks to its power Diesel and electric motors.

DS8000: a vacuum combining optimal air flow and vacuum values with an effective filter system.

VacBlast 45 is a model designed for the world of sandblasting, but that finds it’s perfect application in any kind of industry. It’s equipped with lobe pump, main filter in pockets, safety filter, container for the material’s collection and a discharge valve.