Pails | Optional 2 x 5L | Dimensions | 810 x 530 x 870 mm |
Castors | 4 x 75 mm |
VersaClean Systems – VMV2222
The Versamop VMV-2222 mopping unit is a further extension of our classic design, allowing for the use of a variety of flat mops without variation to the module or its on-board facilities.
Full 22-litre clean water (blue) and dirty water (red) facilities and our efficient Allmops press, with its unique high efficiency mop absorber system, provides exceptional operational performance.
Related products

The combination of Structofoam and stainless steel is a standard very close to our engineering hearts and this is never more obvious than in our classic NTD-2003 Industrial. Here you have a big capacity machine; a powerful Structofoam, Twinflo’ two-motor power head, giant shakeable filter system, stainless steel container and heavy-duty transit chassis. Designed to perform well and give good results - year in year out. The standard accessory kit is 38mm (1 1/2”) but by virtue of the clever multi-purpose cyclonic inlet design accessories from the 51mm (2”) and 76mm (3”) range can also be selected without machine variations (see Accessory catalogue). Be it builder’s rubble, a chicken house or a textile mill, the NTD-2003 will give you good, reliable service.

The 900 series of “H” specification machines has been specifically designed to meet the requirements of industries where it is necessary to remove dust that could constitute a health hazard. The power head is of all-steel construction and is available in a choice of one or two motor construction. Power and performance are to full Twinflo’ standards and plugged easily replaceable cable systems are a standard fitment. The HEPA filter units are securely mounted on their steel module with separate primary pre-filter mounted within the main container and the machines are designed to use our giant Microflo’ dust bags to ensure easy, clean and safe emptying. This machine is available with a Simplex single motor power-head (HZ 900) and 32mm kit or a Duplex twin motor power-head (HZD 900) and a 38mm kit.

Equipped with our full twin 22-litre mopping kit (BK2) which includes generous 22-litre clean and dirty water buckets and the highly efficient Allmops press which incorporates our unique mop absorber feature that substantially improves operating performance. When you select your preferred mop system additional mop heads are available to order as required.

Woodworker Airo system – a complete package for revitalising and maintaining wooden floor surfaces. The full 1500 Watt motor unit packs almost 50% more power than normally required and this power is transmitted to the floor through our long established 150rpm, oil filled, low load, planetary gearbox. The big advantage of excess power is to provide scope for many additional tasks where the excess power is both advantageous and needed. Crystallization, floor sanding, scarifying, adding 10 kg or 20 kg of extra weight, all of these can be accommodated with this standard machine.

There are areas that need static waste units - where the individual disposal of waste is convenient, and where separation of waste is an important consideration, colour-coded systems can be used to ensure a disciplined waste policy. Static waste unit which holds a single 120L disposable plastic sack. Steel frame, with transport wheels and tough polypropylene bottom tray and lid.

Equipped with our full twin 22-litre mopping kit (BK2) which includes generous 22-litre clean and dirty water buckets and the highly efficient Allmops press which incorporates our unique mop absorber feature that substantially improves operating performance. When you select your preferred mop system additional mop heads are available to order as required.

The VCN-1804 has been developed from the ground up, giving high priority to exceptional mobility, constructional integrity and usability, with numerous optional facilities able to be added to extend the scope of the product to meet different requirements. Construction is based on our well established Structofoam specification; equipped with 200mm (8”) heavy duty, super quiet castors, rotary corner protection and soft side-wall protection. Deep base and trays provide plenty of practical storage and room for a choice of cleaning pails with or without lids. The universal waste system is standard, allowing the use of single 120-litre or twin 70-litre waste bags as required.

Equipped with our full twin 22-litre mopping kit (BK2) which includes generous 22-litre clean and dirty water buckets and the highly efficient Allmops press which incorporates our unique mop absorber feature that substantially improves operating performance. When you select your preferred mop system additional mop heads are available to order as required.