The Santoemma HOT Sabrina Foam Extraction Machine is a foam extraction machine, with internal compressor.
Thanks to a Santoemma patented system, HOT Sabrina Foam is able to spray a special HOT dense foam on the surface to be cleaned. HOT foam is even more effective than foam at room temperature and allows an even shorter drying time. Foam is instantly heated as soon as the machine is switched on. The foam density is adjustable. HOT-Sabrina-Foam can work also as a HOT injection-extraction machine.
Its high-waterlift vacuum system allows to recover the maximum quantity of dirt from carpet and upholstery and to get a shortest drying time.
Santoemma HOT Sabrina Foam Extraction Machine can also be used with the power-brush tool NS270BRUSH, in order to get a better cleaning result, thanks to the mechanical action of the cylindrical brush.
Adding a special Santoemma device, it is possible to deliver a sanitizing chemical in the form of 7 micron dry fog.
The dry fog is delivered for a time sufficient to completely fill the rooms and then left to act for a few minutes in order to exercise its sanitizing action. This type of dry fog allows you to reach every point, without wetting the surfaces.
The machine can be left inside the room to be treated. Alternatively, you can leave the machine out of the room, placing inside only the chemical tank.
Cleaning companies, trains, busses, planes, cinemas, theatres, ferry boats, ships, airports.
Advantages
– Cleaning with hot dense foam, carpet and upholstery gets dry in a very short time: about 20 minutes.
– Hot foam allows an excellent cleaning result, thanks to the combined effect of chemical and temperature.
– The same machine can be used with hot foam-extraction system or with hot injection-extraction system.
– The high-waterlift vacuum system allows to recover the maximum quantity of dirt from carpet and upholstery and to get a shortest drying time.
– Possibility to use the machine with a the special rotating brush wand NS270BRUSH, to enhance the cleaning result thanks to the mechanical action of the cylindrical rotating brush. The wand can be used for foam-extraction cleaning or injection-extraction cleaning.
Technical Specifications
(*) Actual performance depends on the type of cleaning required: deep cleaning – maintenance cleaning.
| Approximate performance (*): | 20-30 seats/h |
| Recovery tank capacity: | 14 litres |
| Clean water tank capacity: | 14 litres |
| Vacuum motor: | 2 stages – High waterlift |
| Power: | 1500 W |
| Maximum waterlift: | 3000 mm H2O |
| Maximum air-flow: | 50 l/sec. |
| Pump with by-pass: | vibrating |
| Power: | 70 W |
| Maximum pressure: | 4 bar |
| Maximum water-flow: | 1,5 l/min |
| Compressor: | 350W |
| Dilution rate: | 1 part chemical | 4 parts water |
| Solution consumption: | about 30/40 grams/seat |
| Cable lenght: | 10 m |
| Hoses length: | 2,5 m |
| Weight (machine body): | 47 kg |
| Weight (packaged machine): | 69 Kg |
| Dimensions: | 32 x 55 x 97 cm |
| Package dimensions: | 42 x 65 x 103 cm |
| Units/pallet | 1 pc/pallet | (42 x 65 x 103h) |
| Standard color: | Blue |
| Tank construction: | High density polyethylene |
| Instant heater: | 1800W (1500W at 110V) |
| Maximum foam temperature: | about 65°C |
| Sound pressure level – ISO3744 (1m): | 76 dB(A) |
Technical Advantages of the Santoemma HOT Sabrina Foam Extraction Machine
– High density polyethylene tanks, very strong and made for lasting a long time.
– Transparent unbreakable cover, which allows to see the dirty water while it is sucked.
– Recovery tank with integrated handle. The tank can be easily detached from the machine body, in order to make the tank emptying and cleaning easier.
– The filter of the vacuum motor is easily removable for cleaning.
– The gaskets are replaceable by hand since they are not glued. Easy to clean and change.
– Strong wheels, in anti-mark rubber.
– Brass quick-disconnect couplings, reliable and strong.
– Water pump with bypass, which allows an automatic regulation of the optimal water flow according to the tool used. Moreover, the bypass device makes the pump more reliable and avoids problems in the years.
– Pump built on Santoemma specifications, for a longer life.
– Vacuum motor with thermal protection against overload.
– Vacuum motor treated against rust.
– Both motor and pump can work continuously.
– Modular design that makes the maintenance easier. The maintenance of the machine can be done at low costs.
